老牛嫩草国产一区二区三区

    进口YUKEN电磁换向阀，惭厂奥-01-齿-30

    公司QQ：2880626087

    电话；021-69001039

    手机；17321017802（微信）

    邮箱；17321017802@163.com

    联系人；周彩云

    地址：上海市嘉定区江桥嘉涌路99弄6号713室

    These DSG-005 series solenoid operated directional valves are the products

    newly developed as a "Mini-series". Compared with DSG-01 series,

    the valves are much more compactly manufactured but enjoy a maximum

    operating pressure of 25 MPa (3630 PSI) and a maximum flow rate of

    Recommended Viscosity and Oil Temperatures

    Due caution must be paid to maintaining control over contamination of the hydraulic fluids which may otherwise lead

    to breakdowns and shorten the life of the valve.

    Please maintain the degree of contamination within NAS 1638-Grade

    11. Use 20 μm or finer line filter.

    Solenoids

    differs according to the spool ty pe and operating conditions. For details,

    please refer to the "List of Standard Models and Maximum Flow" on pages

    3 and 4.

    Tank Port

    Do not connect the tank port to any pipe line having a

    surge pressure in it. Be sure to keep the end of the tank line

    pipe below the oil level. As the solenoids are of wet type

    structure, it is necessary to make piping in such condition

    that the inside of the valve is always filled with the fluid.

    Petroleum base oils

    Sy nthetic fluids

    Water containing fluids

    Use fluids equivalent to ISO VG 32 or VG46.

    Use phosphate ester or poly ol ester fluid. When phosphate ester fluid is used, prefix "F-" to the m odel

    number because the special seals (fluororubber) are required to be used.

    10 L/min (2.6 U.S.GPM), while contributing further to a space saving

    Viscosity: 20-200 mm2 /s (100-930 SSU), Temperature: -15 to+60°C (5 to 140°F).

    Instructions

    As the solenoids have no surge absorbers, please pay

    cautious attention to a surge voltage.

    Mounting Posture

    For any model, there are no restrictions regarding the

    mounting posture.

    Solenoid Energisation

    When energising one solenoid, be sure to de-energise

    another solenoid beforehand.

    requirement. Moreover, using wet armature solenoids, the valves ensure

    the long life.

    The m aximum flow m eans the limited flow without inducing

    any abnormality to the operation (changeover) of the valve. The m aximum flow

    Use water-gly col fluids or W/O emulsion ty pe fluids.

    Always be sure to use hydraulic fluids within the stipulated conditions shown below:

    进口YUKEN电磁换向阀，惭厂奥-01-齿-30