供应不二越电磁换向阀 ,SAW-G01
老牛嫩草国产一区二区三区
电 话:021-39529830转8012
手 机;18917074297
公司蚕蚕;2880626083
邮箱;18917074297蔼163.肠辞尘
联系人:周彩云
地址:上海市嘉定区江桥嘉涌路6号楼713
是监控阀的切换位置,可输出开关信号的一种电磁切换阀。
由于是通过阀工作直接使开关运作的结构,
Maximum load current 100mA
Residual voltage max 1.2V
So that an accurate switching signal can be obtained.
When the spool is in a neutral state,
较大流量 标准型 30~100 L/min (注1)
Maximum flow standard type 30 ~ 100 L / min (Note 1)
Damping type 30, 50 L / min (Note 1)
The fixed contact is in contact with the movable contact to form an electrically conductive state.
类型 阀芯类型
较大使用压力 标准型 35MPa
Is the monitoring valve to switch the location, can output a switch signal electromagnetic switching valve.
Because the structure of the switch is operated directly through the valve,
残留电压 max 1.2V
Since the magnetic sensor and the proximity sensor are not used,
So the start time of the switching signal is almost independent of the temperature and the direction of operation of the valve.
Series SAW-G01
Type of spool type
Maximum use of pressure standard type 35MPa
Damping type 25MPa
阀芯运转后,可动接点连动向左侧移动,
After the spool is running, the movable contact moves to the left,
Fixed contact and movable contact become non-conductive.
减震型 25MPa
监控开关 定额电压 DC24V
较大负荷电流 100mA
阀芯处于中立状态时,
固定接点与可动接点接触,形成电导通状态。
减震型 30, 50 L/min (注1)
所以能够获得准确的开关信号。
由于不使用磁性传感器和接近传感器,
所以开关信号的启动时间几乎不受温度和阀的运转方向的影响。
系列 SAW-G01
Monitor switch rated voltage DC24V
固定接点与可动接点变为非电导通状态。
供应不二越电磁换向阀 ,SAW-G01
021-39526589
网址:飞飞飞.辩颈补苍迟.苍别迟
地 址:上海市嘉定区嘉涌路99弄
6号楼713室