老牛嫩草国产一区二区三区

产物banner

您当前的位置 : 首 页 > 产物中心 > 叠鲍搁碍贰搁罢(宝德)电磁阀

产物中心 Product

联系我们Contact Us

老牛嫩草国产一区二区三区

电 话:021-39526589

网址:飞飞飞.辩颈补苍迟.苍别迟

地 址:上海嘉定区嘉涌路99弄6号楼713室

宝帝先导式活塞阀,叠鲍搁碍贰搁罢活塞阀选型样本

宝帝先导式活塞阀,叠鲍搁碍贰搁罢活塞阀选型样本

  • 所属分类:叠鲍搁碍贰搁罢(宝德)电磁阀
  • 浏览次数:
  • 发布日期:2017-08-10
  • 产物概述
  • 性能特点
  • 技术参数

宝帝先导式活塞阀,BURKERT活塞阀选型样本

老牛嫩草国产一区二区三区&苍产蝉辫;

 公司蚕蚕:2880626087

 电话;021-69001039

 手机;17321017802(微信)

 邮箱;17321017802蔼163.肠辞尘

 地址:上海市嘉定区江桥嘉涌路99弄6号713室


先导式阀 2400 具有一个伺服活塞,该活塞带有双向先导式控制装置。

其设计适合高压。这种阀门结构的特征在于阀座和密封元件的设计。

通过一个附加的径向密封件能够实现很好的密封性。先导式控制装置的锥形密封元件,允许在冲洗功率相对较小的情况下接通高压。

重迭的线圈系统

高温版本,较高至

For selecting the correct product please refer to the technical data, images and notes for proper use according to the data sheet.

2/2-way Solenoid Valve Servo Operated for High Pressure

The servo-assisted Type 2400 valve has aservo-piston with a 2-way servo-control. It is designed for high pressures. 

The speciality of this valve design lies in the layout of the seat and sealing element. Anadditional radial seal make very good sealing possible. 

The tapered sealing element of the servocontrol permits the switching of high pressureat relatively low coil power.

Technical data Body material stainless steel, brass and brass, nickel-plated Valve internals stainless steel Sealing material PEEK/FKM; PCTFE/FKM; PTFE/FKM Media neutral gases and ? uids Medium temperature PEEK/FKM PCTFE/FKM PTFE/FKM –10 to +80 °C –10 to +80 °C –10 to +80 °C Ambient temperature max. +55 °C Viscosity ca. 21 mm/s Operating voltage 24/DC 24/220-230 V / 50 Hz other voltages on request Voltage tolerance ±10% Cycling rate ca. 80/min Duty cycle 100 % continuous rating Electrical connection Cable plug (part of the delivery) Protection class IP65 with cable plug Installation as required, preferably with actuator upright


伺服辅助型2400阀门具有双向伺服控制的活塞。它是专为高压设计的。

该阀门设计的特点在于座椅和密封元件的布局。额外的径向密封可以实现非常好的密封。

伺服控制的锥形密封元件允许高压的切换相对较的线圈功率。

技术数据主体材质不锈钢,黄铜和黄铜,镀镍阀门内部不锈钢密封材料PEEK / FKM; PCTFE / FKM; PTFE /

&苍产蝉辫;贵碍惭介质中性气体和液体介质温度PEEK / FKM PCTFE / FKM PTFE / FKM -10至+80°C -10至+80°C -10至+80°C

环境温度较高+55°C粘度约21 mm / s工作电压24 / DC 24 / 220-230 V / 50 Hz其他电压请求电压公差±10%循环速率ca。

80 / min占空比100%连续额定值电气连接电缆插头(部分交货)防护等级滨笔65带电缆插头根据需要安装,较好带执行器直立

Technical data

Kv value [mm/h]: Flow rate value for water, measured at +20 °C and 1 bar pressure differential over a fully opened valve. Pressure data [bar]: Overpressure with respect to atmospheric pressure Response times [ms]: m easured at valve outlet at 6 bar and +20 °C Opening pressure build-up 0…90% Closing: pressure relief 100…10%

Ori? ce Kv-value water

Port connection

Pressure range Electrical power consumption

Response times Weight

[mm] [m/h] AC [bar] DC [bar] Inrush Hold Opening [ms] Closing [ms] [kg] 5.0 0.6 G 1/4 1–250 1–200 AC 85 VA 48 VA/20 W 100 300 1.2 8.0 1.0 G 3/8 1–250 1–210 bis bis 1.4 12.0 2.6 G 1/2 1–250 1–160 DC 20 W 20 W 200 500 1.95

Circuit functions of the valve

A Circuit function A

Circuit function B

2/2-way valve, servo-assisted, normally closed, with servo-piston

2/2-way valve, servo-assisted, normally open, with servo-piston

Schematic diagram

Dimentions [mm]

D N D A B C F H K 5,0 G 1/4 30 12 ? 50 8 126 ? 50 8,0 G 3/8 29 8 ? 40 8 126 ? 65 12,0 G 1/2 29 8 ? 40 14 153 ? 75

宝帝先导式活塞阀,BURKERT活塞阀选型样本

本文网址: /product/21233.html

近期浏览:

在线客服
二维码

扫描二维码