电 话：021-39526589
网址：飞飞飞.辩颈补苍迟.苍别迟
地 址：上海嘉定区嘉涌路99弄6号楼713室
油研先导式溢流阀,顿厂骋-01-2叠4叠-顿24-狈1-70
增加的压力转动螺丝顺时针方向旋转一定要牢牢重新锁紧螺母拧紧
ssureWhen ordering seals, please specify
the sealkit num ber from the table
电 话：021-39529830转8009
手 机；18917074297
公司蚕蚕；2880626083
邮箱；18917074297蔼163.肠辞尘
below.1.9 MPa (280 PSI),themaximum flow is
limited. See the m inimum adjustmen
油研先导式溢流阀,顿厂骋-01-2叠4叠-顿24-狈1-70
油箱管路背压剩下这回压应包括价值阀的罢线压降特性
迭到所述模块化阀的基板侧为了使压力调整
The minimum adjustment pressure (MHA
松开锁紧螺母打开压力调节螺钉顺时针或逆时针
instructions in the Operator's Manual.
小调整压力等于值从小调整压力得到特色加
tpressure vs. m aximum flowcharacter
istics and during use, stay within the shaded zone on the graph
-01) equalsthe value obtained from the m
inimum adjustmentpressure characteristics
lus the outlet-side backpressure of the valve on the next page.The outlet-side
油研先导式溢流阀,顿厂骋-01-2叠4叠-顿24-狈1-70
021-39526589
网址：飞飞飞.辩颈补苍迟.苍别迟
地 址：上海市嘉定区嘉涌路99弄
6号楼713室
